Harvey Hv3 Water Softener Installation Manual

Keep the Inlet and Outlet valves and open the Bypass valve .

Turn the main house stopcock back on and check for leaks around your new pipework joints.

The drain line carries away the brine and backwash water during regeneration. The manual specifies: harvey hv3 water softener installation manual

: Insert a flat-blade screwdriver into the white button under the cover. Press and rotate one full turn clockwise until it pops back up. The unit will drain for roughly 10–12 minutes.

: The guide typically includes diagrams for the four main connections: inlet, outlet, drain, and overflow. Strengths and Weaknesses Keep the Inlet and Outlet valves and open the Bypass valve

Locate your property's main stopcock (usually under the kitchen sink or near the water meter).

Check all joints, hoses, and fittings on the back of the unit immediately for leaks. Slowly open the . The manual specifies: : Insert a flat-blade screwdriver

Cut into the main cold water line after the internal stopcock, but before any branches feed the water heater or kitchen cold taps.

Before we dive into the installation process, let's take a look at the components that come with the Harvey HV3 water softener:

[Inlet Valve] │ ───(Mains In)────────┴─────▶[Bypass Valve]─────▶(To House Taps) ▲ │ │ [Outlet Valve] Use code with caution. Feeds hard water into the softener. Outlet Valve: Sends softened water into your home.

: Connect the overflow hose to the side of the cabinet and run it downhill through an outside wall to a visible location. 3. Startup & Commissioning