Installation Guide Free | Nokia 7250 Ixr X1

You are now in the Linux shell ( bash ). To enter the SR Linux CLI:

The system will not boot safely without at least three functioning fans.

Upon receiving the , conduct a thorough inspection. Inspect Packaging: Check for exterior damage.

Do not remove the dust plugs from the optical transceivers or the router ports until you are ready to connect the fiber. nokia 7250 ixr x1 installation guide

Insert the AC power cord into the appliance inlet on the PSU.

Typical tools include a torque screwdriver, cage nut tool, cable ties, and grounding cable. 2. Unpacking and Inspection

Do not block air intake on the sides or rear. Maintain 6 inches of clearance on both sides. You are now in the Linux shell ( bash )

: Maintain a continuous ambient operating temperature between 0°C and 40°C (32°F to 104°F).

400GE (QSFP-DD), 100GE (QSFP28), and 10/25GE (SFP+/SFP28) native capabilities

U-Boot SPL 2022.04 (Jan 10 2024 - 10:00:00) Nokia 7250 IXR-X1 DDR init complete Loading Linux... [ 0.000000] Booting Linux on physical CPU 0x0 ... Starting SR Linux (Service Routing Linux)... Inspect Packaging: Check for exterior damage

Once these steps are completed, your Nokia 7250 IXR-X1 hardware deployment is complete, and the router is ready for downstream service provisions and network integration.

Plug the IEC-compliant AC power cords into the respective PSU receptacles.

To configure the router, establish a serial console session.

Switch on the power source. Observe the LED indicators to confirm that the PSUs and fan modules are operational. 6. Initial Configuration and Verification

Standard 19-inch Electronic Industries Alliance (EIA) rack or ETSI rack.