Before attempting complex solutions, eliminate simple causes that can trigger this error.
Many beginners try to flash only the AP file. This can cause repartition errors because the bootloader (BL) and modem (CP) versions mismatch the partition expectations.
Ensure Samsung Smart Switch or Kies is completely closed via the Windows Task Manager, as these programs conflict with Odin for device control. ⚠️ What if Nothing Works? (Hardware Assessment)
When solving partition errors, , not the HOME_CSC file. The standard CSC file contains instructions to wipe the device and re-map the storage layout, which often resolves conflicts automatically. 3. Extract and Apply the Correct PIT File re-partition operation failed. odin
Click , accept the warning, and load your extracted .pit file.
To understand the error, you must first understand what "re-partition" means in the context of Odin.
If using a desktop, plug the cable directly into the rear motherboard ports rather than the front case headers. 2. Use a Proper PIT File Ensure Samsung Smart Switch or Kies is completely
: Data transmission interruptions during the critical mapping stage. Troubleshooting Steps
This is common in older devices where the memory chip has reached its "read/write" limit.
This article will explain what the "re-partition operation failed" error means, why it happens, and most importantly, provide 12 proven methods to fix it. The standard CSC file contains instructions to wipe
Some older Samsung devices (S4, Note 3, S5) use a single .tar.md5 file containing all partitions. If the error persists with 4-file firmware, try the one-file version.
The error in Odin is a critical signal that the software is unable to properly write the Partition Information Table (PIT) to your Samsung device. This often results in a "soft brick" where the phone is stuck in Download Mode. Common Causes
Click and choose the CSC_ file (not HOME_CSC_ ). Choosing the dedicated CSC_ file triggers a clean install that completely wipes and recreates the internal partition map correctly.
to ensure your PC recognizes the device correctly in Download Mode. Try a Different Odin Version : If you're on an older device, try Odin v1.85 ; for newer devices, use Odin v3.14.4 Are you currently trying to your device or
: Avoid USB 3.0 (blue) ports or front-panel case ports; use the USB 2.0 ports