Connect another Ethernet cable to the bottom of this second adapter.
Wait approximately 60 seconds for the configuration to complete.
Plug the first PLS-8171 into a wall outlet near your main router. Use an Ethernet cable to connect the router’s LAN port to the adapter’s RJ-45 port.
Allows up to 16 devices to be connected within a single powerline network group. Pass-Through Socket:
What are you currently experiencing?
Ensure the adapter is plugged into a functional wall outlet. Locate the pinhole button on the casing. Insert a straightened paperclip or pin into the hole. Press and hold the button for 10 to 12 seconds.
Take one of the provided Ethernet cables. Plug one end into the Ethernet port at the bottom of the Zinwell adapter.
: The device is receiving electrical power and is ready for use.
Located at the bottom or side of the unit to connect your PC, smart TV, gaming console, or router. zinwell pls-8171 user manual
Keep the adapter away from appliances with electric motors or heavy power consumption, such as refrigerators, washing machines, air conditioners, and phone chargers. Issue 3: Ethernet LED is OFF
If you have a third or fourth Zinwell adapter to add to the network, press the Pair button on any already secured adapter for 2 seconds, followed by the Pair button on the new adapter for 2 seconds. 5. Troubleshooting Common Issues Issue 1: The Powerline LED is completely OFF
The device is receiving electrical power and is ready for operation.
Take the second PLS-8171 adapter to the room where you need internet access (e.g., home office, gaming setup). Plug it directly into a wall outlet. Connect another Ethernet cable to the bottom of
No new wires or software installation required.
This adapter functions as a 3-in-1 solution, providing network data, PoE power, and AC-DC power through a single outlet.
Connect an Ethernet cable from the second adapter's port to your target device (e.g., PC, Smart TV, gaming console, or wireless access point).