Gyd-9e Datasheet [extra Quality] Jun 2026
Designed to replace bulky CCFL inverters in older displays.
Save a copy of this article and cross-reference with a generic "SSR-10AA" datasheet—they share 95% of the same specifications.
: Extremely compact with dimensions of approximately 70mm x 20mm (or 69mm x 19mm depending on the manufacturer), allowing it to fit into slim monitor chassis.
The GYD-9E is available through various electronic component retailers and global marketplaces: gyd-9e datasheet
The GYD-9E module is available from various online electronics retailers, particularly those specializing in TV repair components. It can be purchased as a standalone driver board or as a complete kit including two LED backlight strips.
Converting a legacy CCFL display panel to LED with a GYD-9E hardware kit involves a precise system modifications process. 1. Preparation and Component Sizing Safely unmount the LCD matrix assembly.
The GYD-9E is a "backbone" component for several types of electronic modifications and repairs. Designed to replace bulky CCFL inverters in older displays
: Automatically adjusts based on LED load, typically ranging from Controller Chip : Built on the PWM step-down/step-up converter with current feedback. Dimensions : Ultra-slim profile at Interface and Functionality The board features a standard 6-pin input connector (e.g., CB-PH6INV4P) with the following typical pinout: power supply. ENA (ON/OFF) : High-level signal ( ) to enable the backlight.
Supports manual or digital dimming, typically ranging from 30% to 100%.
: Enable pin. Activating this line with a high logic signal (3.3V to 5V) fires up the boost converter. The GYD-9E is available through various electronic component
: Ensure the board is discharged before handling to avoid electrostatic damage. V. Conclusion
Automatically scales dynamically based on the LED load configuration. 10 mA to 1000 mA (Max)
Operates on DC inputs from 10V up to 30V, making it suitable for 12V or 24V power supplies commonly found in monitors and TVs.