Ensure the device is fully charged or connected to its DC power adapter. Do not turn off the power during the upgrade.
The screen will display the upgrade mode (e.g., Allcode or Software) and ask you to select the file. Highlight the firmware file you copied to the USB drive. Press or Start to begin the process.
Copy the downloaded Satlink WS-6979 firmware file (usually ending in a .bin extension) directly to the of the USB drive. Do not place it inside any folders. Safely eject the drive from your computer. Step 2: Connect to the Meter Turn off your Satlink WS-6979 meter completely.
during the transfer; doing so can "brick" the meter, making it unusable. Factory Reset (Optional but Recommended) Satlink Ws-6979 Software Upgrade
Depending on your firmware version, expect improvements like:
| Problem | Likely Solution | | :--- | :--- | | “No upgrade file found” | SD card not FAT32, or file is inside a folder. Re-format and copy to root. | | Upgrade starts but hangs at 0% | Corrupt firmware or wrong hardware version. Re-download file. | | Device won’t power on after upgrade | Try a recovery: Hold with a different firmware version on SD. | | “File mismatch” error | You are using firmware for a different Satlink model. Double-check the filename. |
Upgrading the software on your (or the Go to product viewer dialog for this item. Ensure the device is fully charged or connected
To upgrade the software on your , you generally perform the process via the USB port . Upgrade Steps via USB
Press the button on your keypad. Use the arrow keys to navigate to System Setup (or the Tools menu, depending on your current layout) and select Upgrade by USB . Step 5: Execute the Flash
: Do not turn off the device or disconnect the power source during the upgrade process. Highlight the firmware file you copied to the USB drive
Always back up your current settings before starting an update.
supports software upgrades directly via its . This handheld combo meter uses a Novatek microprocessor and supports file management systems like FAT32 and NTFS , which are typically required for the device to recognize update files on a flash drive. Upgrade Requirements Storage Device : A USB flash drive formatted to FAT32 .
Satlink WS-6979 is a high-definition combo meter designed for professional satellite and terrestrial signal alignment
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.