A: No. This stove is designed for wood pellets only. Burning other materials (corn, cherry pits, coffee grounds) can damage components, void your warranty, and create hazardous conditions.
When a system abnormality occurs, the Micronova ES99 stops the compressor immediately or blocks it from starting up. The front panel indicators isolate the problem through distinct flash sequences or dedicated alarm icons. 1. Thermal Overload Tripped (Motor Protection)
The Micronova ES99 is a discontinued industrial control module designed for monitoring and managing screw air compressors, with documentation covering terminal mapping, DIP switch configurations, and operational safety protocols. The user manual serves as a critical resource for maintaining these systems, providing detailed instructions on navigating the LCD display to track pressure, temperature, and fault logs. The full manual is available for review on airmakesolution.in micronova es99 user manual
: Tracks critical parameters such as air pressure, oil temperature, and motor status.
After the exhaust probe detects a sufficient rise in temperature, the unit enters "Stabilization." During this time, the igniter turns off, and the pellet feed regulates to establish a steady flame. 3. Run Mode When a system abnormality occurs, the Micronova ES99
If your flame is too high or pellets are overflowing, you can decrease the "Auger Work" seconds in the technical menu.
Erases stored warnings and soft alarms after mechanical issues are taken care of. the igniter turns off
Allow the stove to complete its automatic cooling cycle. Clear the burn pot before restarting. AlT 2 / Er02 - Flue Gas Probe Failure