Insert forks and spoons with their handles pointing downward. Mix spoons and forks within each compartment to prevent them from nesting together. 🧼 Detergent and Rinse Aid Usage
Use a toothpick or safety pin to clear debris out of the individual spray holes, rinse under a faucet, and snap them back into place. Troubleshooting and Error Code Decoding
Use roughly 25 grams of detergent for normal loads, increasing for the intensive cycle. Close the flap firmly until it clicks shut. Rinse Aid Dispenser
If the dishwasher will not be used for a long period, run a cycle with detergent to clean it, then close the water supply and unplug the unit. 7. Troubleshooting ariston ls 603 dishwasher user manual
Owning the user manual for your Ariston LS 603 dishwasher is more than just having a document; it's about unlocking the full potential of your appliance. From mastering the loading techniques to conquering error codes and performing essential maintenance, the information in these pages ensures your machine will run efficiently for years to come.
The standard, most efficient program for normally soiled dishes. Intensive (65°C):
Pre-rinsing a partial load to prevent odors until a full load is ready. 10 – 15 mins Cleaning and Routine Maintenance Insert forks and spoons with their handles pointing downward
| Error Code | Possible Meaning | What You Can Do | | :--- | :--- | :--- | | | Flood protection (Aquastop) activated. Often means there is water in the machine's base pan. | Unplug the machine immediately. Mop up any water around the base. This usually requires a qualified technician to reset. | | A02/A04 | Heating system failure. The water isn't reaching the correct temperature. | The heating element, thermistor, or a related relay may be faulty. Professional repair is needed. | | A03 | Thermistor error detected. The temperature sensor is faulty or has bad wiring. | Check wiring connections if you're experienced, otherwise call a technician. | | F06 | Water fill timeout. The machine isn't getting enough water fast enough. | Check that the water supply tap is fully open and the inlet hose screen is not clogged. | | F13 | NTC thermistor / temperature sensor error. | Likely a faulty sensor. Resetting the machine may temporarily clear it, but professional replacement is recommended. | | F15 | Pump is jammed or blocked by debris. | Unplug the machine, remove the filter, and check the pump impeller for obstructions. |
If you need to access the full user manual, I can suggest a few options:
Use the cutlery basket for forks, spoons, and knives. Ensure items are not nesting. Troubleshooting and Error Code Decoding Use roughly 25
Food particles can clog the tiny water jet holes in the spray arms. Pull off the upper and lower spray arms.
If your dishwasher drains into your kitchen sink plumbing, ensure the sink drain is clear. If it is a new sink installation, verify that the knockout plug inside the sink spigot was removed.
If you've lost your original paper manual, don't worry. There are several places where you can find a replacement.