Stc-600 Temperature Controller Manual Pdf __link__ [ REAL ]

Power Input: 1 (Neutral) – 2 (Live 110–220V) Sensor: 3 (Sensor+) – 4 (Sensor-) Cooling Relay: 5 (COM) – 6 (NC – to compressor/cooling) Heating Relay: 7 (COM) – 8 (NO – to heater)

| Code | Function | Default | Range | Description | |------|----------|---------|-------|-------------| | F1 | Heating differential | 2.0°C | 0.1–15°C | Heating stops when PV ≥ SV | | F2 | Cooling differential | 2.0°C | 0.1–15°C | Cooling starts when PV ≥ SV+F2 | | F3 | Temperature calibration | 0.0°C | -10–10°C | Adjust sensor deviation | | F4 | Compressor delay | 0 min | 0–10 min | Anti-short cycle delay | | F5 | High temp alarm | 110°C | Off, SV–120°C | Alarm if PV > F5 | | F6 | Low temp alarm | -50°C | -50–SV | Alarm if PV < F6 | | F7 | Working mode | 0 | 0 or 1 | 0=Cooling priority, 1=Heating priority | | F8 | Restore defaults | 0 | 0 or 1 | Set to 1 to reset all settings | | F9 | Temperature unit | 0 | 0 or 1 | 0=°C, 1=°F |

The "hysteresis"—how many degrees the temp must rise before the compressor kicks back on. Compressor Delay Stc-600 Temperature Controller Manual Pdf

Which of those would you like next?

: Exits menus, saves settings, or mutes the buzzer alarm manually. Indicator Light Reference Table Cool / Heat Relay closed; load is running Cool / Heat Compressor startup delay active Defrost Defrost function currently active Alarm Device is in an active error state Parameter Settings Menu Power Input: 1 (Neutral) – 2 (Live 110–220V)

Fix: Check if the cooling equipment is functioning or if the ambient room temperature is too high.

Connect the compressor to the compressor terminal. Indicator Light Reference Table Cool / Heat Relay

To get the full technical specifications, wiring diagram, and complete parameter list, you can download the STC-600 instructions PDF.

This section presents the core specifications essential for proper installation and use, based on official product datasheets.

is designed primarily for controlling refrigeration, defrosting, and fan operation in industrial settings. It features a dual-display interface that shows the current temperature and allows for easy adjustment of settings, including a "Return Difference" (Hysteresis) function to prevent premature compressor cycling. Key Features